Steel Cord Conveyor Belt
Standards: GB9770-88, MT147, MT668, DIN22131, JISK6369, AS1333 etc.
Structure: The belt core is comprised of longitudinally and evenly arranged non-spinning galvanized wire ropes and high adhesive core rubber, with the upper side and lower side covered with rubber layer.
Features: High tensile strength, long service life, short elongation under service, good groove formation property and good anti-flexure property, suitable for conveying materials across long distance, with large volume and high speed.
Types: According to structure: General type, Impact resistance and Rip resistance transverse type. According to application: besides General-used steel cord belt, there are some kinds of Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, High-grade type and etc.
Model: ST1000,ST1250,ST1600,ST2000,ST2500,ST3150,ST3500,ST4000,ST4500,ST5000,ST5400.
1) Technical Data For Steel Cord Conveyor Belt According to DIN22131
Note: The length of single roll of conveyor belt is 100m-1500m, depending on its thickness, width, transportation and installation conditions. The length shall be determined through discussion of supplier and buyer.
2) Cover rubber property and grades:
3) Min. Pulley Diameter:
4) According to standards:
Standards: GB9770-88, MT147, MT668, DIN22131, JISK6369, AS1333 etc.
Structure: The belt core is comprised of longitudinally and evenly arranged non-spinning galvanized wire ropes and high adhesive core rubber, with the upper side and lower side covered with rubber layer.
Features: High tensile strength, long service life, short elongation under service, good groove formation property and good anti-flexure property, suitable for conveying materials across long distance, with large volume and high speed.
Types: According to structure: General type, Impact resistance and Rip resistance transverse type. According to application: besides General-used steel cord belt, there are some kinds of Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, High-grade type and etc.
Model: ST1000,ST1250,ST1600,ST2000,ST2500,ST3150,ST3500,ST4000,ST4500,ST5000,ST5400.
| ST1000 | ST1250 | ST1600 | ST2000 | ST2500 | ST3150 | ST3500 | ST4000 | ST4500 | ST5000 | ST5400 | |
Longitudinal Tensile
Strength (N/mm) |
1000 |
1250 |
1600 |
2000 |
2500 |
3150 |
3500 |
4000 |
4500 |
5000 |
5400 |
Steel
diameter(mm) |
4.1 |
4.9 |
5.6 |
5.6 |
7.2 |
8.1 |
8.6 |
8.9 |
9.7 |
10.9 |
11.3 |
Space length
Between Cords (mm) |
12 |
14 |
15 |
12 |
15 |
15 |
15 |
15 |
16 |
17 |
17 |
Min.
Cover Thickness |
4 |
4 |
4 |
4 |
5 |
5.5 |
6 |
6.5 |
7 |
7.5 |
8 |
Width item (mm) |
Steel cords Number |
||||||||||
500 |
39 |
34 |
|||||||||
650 |
51 |
44 |
40 |
51 |
40 |
40 |
40 |
40 |
37 |
||
800 |
64 |
55 |
50 |
64 |
50 |
50 |
50 |
50 |
46 |
43 |
43 |
1000 |
81 |
69 |
64 |
81 |
64 |
64 |
64 |
64 |
59 |
55 |
55 |
1200 |
97 |
84 |
77 |
97 |
77 |
77 |
77 |
77 |
71 |
66 |
66 |
1400 |
114 |
98 |
90 |
114 |
90 |
90 |
90 |
90 |
84 |
78 |
78 |
1600 |
131 |
112 |
104 |
131 |
104 |
104 |
104 |
104 |
96 |
90 |
90 |
1800 |
147 |
127 |
117 |
147 |
117 |
117 |
117 |
117 |
109 |
102 |
102 |
2000 |
164 |
141 |
130 |
164 |
130 |
130 |
130 |
130 |
121 |
113 |
113 |
2200 |
181 |
155 |
144 |
181 |
144 |
144 |
144 |
144 |
134 |
125 |
125 |
2400 |
197 |
169 |
157 |
197 |
157 |
157 |
157 |
157 |
146 |
137 |
137 |
2600 |
214 |
184 |
170 |
214 |
170 |
170 |
170 |
170 |
159 |
149 |
149 |
2800 |
231 |
198 |
170 |
214 |
170 |
170 |
170 |
170 |
159 |
149 |
149 |
3000 |
247 |
212 |
197 |
247 |
197 |
197 |
197 |
197 |
184 |
172 |
172 |
3200 |
264 |
227 |
210 |
264 |
210 |
210 |
210 |
210 |
196 |
184 |
184 |
2) Cover rubber property and grades:
Test items |
Property indexes |
|||||||
GB9770-2001 |
DIN22131 |
|||||||
D |
H |
L |
P |
W |
X |
Y |
||
Tensile strength |
Mpa ≥ |
18 |
25 |
20 |
14 |
18 |
25 |
20 |
Elongation at break |
% ≥ |
400 |
450 |
400 |
350 |
400 |
450 |
400 |
Aging test (70℃、7D) change rate of tensile strength |
% |
-25～+25 |
-25～+25 |
-25～+25 |
-25～+25 |
-25～+25 |
-25～+25 |
-25～+25 |
Abrasion |
≤ |
90MM3 |
120MM3 |
150MM3 |
200MM3 |
90MM3 |
120MM3 |
150mm3 |
3) Min. Pulley Diameter:
Type |
St1000 |
St1250 |
St1600 |
St2000 |
St2500 |
St3150 |
St3500 |
St4000 |
St4500 |
St5000 |
St5400 |
Min.Pulley Diameter |
630 |
800 |
1000 |
1000 |
1250 |
1400 |
1500 |
1600 |
1600 |
1800 |
1800 |
4) According to standards:
| Type | According to Standards |
| Ultra-high abrasion resistant | Shore abrasion≤70mm3 |
| High abrasion resistant | AS1333 A,DIN22131 W, GB9770 D |
| Impact and abrasion resistant | DIN22131 X Y, AS1333 M N, JIS K6369 D H,GB/T9770 H L |
| Heat resistant | ISO 4195,HG/T2297,GB/T20021 |
| Flame resistant & Anti static general use | DIN 22131 K |
| Flame resistant & Anti static for coal mine use | MT 668, MT147, AS1333 F |
| Oil resistant | HG/T3714 |
| Acid/alkali resistant | HG/T3782 |
| Cold resistant | HG/T3647 |
| Ozone resistant | RMA (ASTM D1171) |